湖北省光纜OPGW光纜廠家opgw-24b1-80* 湖南廠家
OPGW光纜,Optical Fiber Composite Overhead Ground Wire(光纖復合架空地線)OPGW光纜,Optical Fiber Composite Overhead Ground Wire(光纖復合架空地線)·Description
OPGW光纜主要在500KV 、220KV 、110KV電壓等線路上使用,受線路停電、安全等因素影響,多在新建線路上應用。
OPGW的適用特點是:
(1)高壓超過110kv的線路,檔距較大(一般都在250M以上);
(2)易于維護,對于線路跨越問題易解決,其機械特性可滿足線路大跨越;
(3)OPGW外層為金屬鎧裝,對高壓電蝕及降解無影響;
(4)OPGW在施工時必須停電,停電損失較大,所以在新建110kv以上高壓線路中應該使用OPGW;
(5)OPGW的性能指標中,短路電流越大,越需要用良導體做鎧裝,則相應降低了抗拉強度,而在抗拉強度一定的情況下,要提高短路電流容量,只有增大金屬截面積,從而導致纜徑和纜重增加,這樣就對線路桿塔強度提出了安全問題。
層絞不銹鋼管式光纖復合架空地線規格、結構及相關參數
項目 | 單位 | 規格 | |||||||||
導體截面積 | mm2 | 87/44 | 44/87 | 0/131 | 109/54 | 54/109 | 0/163 | 125/63 | 63/125 | 0/188 | |
光纖芯數 | 芯 | 24 | 24 | 24 | 36 | 36 | 36 | 48 | 48 | 48 | |
每管光纖數 | 芯 | 24 | 24 | 24 | 36 | 36 | 36 | 48 | 48 | 48 | |
不銹鋼管直徑 | mm | 3.0 | 3.0 | 3.0 | 3.35 | 3.35 | 3.35 | 3.6 | 3.6 | 3.6 | |
光纜直徑 | mm | 15.3 | 15.3 | 15.3 | 17.0 | 17.0 | 17.0 | 18.3 | 18.3 | 18.3 | |
光纜重量 | kg/km | 550 | 715 | 890 | 680 | 890 | 1100 | 780 | 1020 | 1270 | |
光 纜 結 構 及 尺 寸 | 中心層鋁包鋼數量/直徑 | 根/mm | 1/3.05 | 1/3.05 | 1/3.05 | 1/3.4 | 1/3.4 | 1/3.4 | 1/3.65 | 1/3.65 | 1/3.65 |
*層鋁包鋼數量/直徑 | 根/mm | 5/3.05 1/3.0 | 5/3.05 1/3.0 | 5/3.05 1/3.0 | 5/3.4 1/3.35 | 5/3.4 1/3.35 | 5/3.4 1/3.35 | 5/3.65 1/3.6 | 5/3.65 1/3.6 | 5/3.65 1/3.6 | |
*層絞合方向 |
| 左向(S) | |||||||||
第二層材料 |
| 鋁合金 | 鋁包鋼 和 鋁合金 | 鋁包鋼 | 鋁合金 | 鋁包鋼 和 鋁合金 | 鋁包鋼 | 鋁合金 | 鋁包鋼 和 鋁合金 | 鋁包鋼 | |
第二層導體數量/直徑 | 根/mm | 12/3.05 | 7/3.05 7/3.05 | 12/3.05 | 12/3.4 | 7/3.4 7/3.4 | 12/3.4 | 12/3.65 | 7/3.65 7/3.65 | 12/3.65 |
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.
·Characteristics
· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of fiber
· Crush resistance and flexibility
· PSP enhancing moisture-proof
· Two parallel steel wires ensure tensile strength
· Small diameter, light weight and friendly installation
· Long delivery length
·Standards
GYXTW cable complies with Standard YD/T 769-2003.
·Optical Characteristics
| G.652 | G.655 | 50/125μm | 62.5/125μm | |
Attenuation (+20℃) | @850nm |
|
| ≤3.0 dB/km | ≤3.0 dB/km |
@1300nm |
|
| ≤1.0 dB/km | ≤1.0 dB/km | |
@1310nm | ≤0.36 dB/km | ≤0.40 dB/km |
|
| |
@1550nm | ≤0.22 dB/km | ≤0.23dB/km |
|
| |
Bandwidth (Class A) | @850nm |
|
| ≥500 MHz·km | ≥200 MHz·km |
@1300nm |
|
| ≥1000 MHz·km | ≥600 MHz·km | |
Numerical Aperture |
|
| 0.200±0.015NA | 0.275±0.015NA | |
Cable Cut-off Wavelengthλcc | ≤1260nm | ≤1480nm |
|
|
·Technical Parameters
Cable Type | Fiber Count | Cable Diameter mm | Cable Weight kg/km | Tensile Strength
Long/Short Term N | Crush Resistance
Long/Short Term N/100mm | Bending Radius
Static mm |
GYXS/GYXTW-2~12 | 2~12 | 10.0 | 105 | 600/1500 | 300/1000 | 10D/20D |
GYXS/GY XTW-2~12 | 2~12 | 10.6 | 124 | 1000/3000 | 1000/3000 | 10D/20D |
GYXS/GY XTW-14~24 | 14~24 | 12.5 | 149 | 1000/3000 | 1000/3000 | 10D/20D |
GYXS/GY XTW-26~36 | 26~36 | 14.0 | 190 | 1000/3000 | 1000/3000 | 10D/20D |
GYXS/GY XTW-38~48 | 38~48 | 15.0 | 216 | 1000/3000 | 1000/3000 | 10D/20D |
Storage/Operating Temperature : -40℃ to + 70℃